Think about the days you are fed up with your garbage disposal unit. It’s not working well.
Furthermore, the situation would be terrible if the problem occurs when you’re cooking for a holiday event, party, or having some guests or friends over.
But what if you can solve this problem simply on your own? You can also save some money!
Unjamming a garbage disposal unit is a routine hassle you have to face. An efficient garbage disposal Allen wrench will surely make your task easier. So, how will you fix a garbage disposal with an Allen wrench?
Firstly, identify what size Allen wrench for garbage disposal is most suitable for your job. Then get rid of the annoying situation.
What Size Allen Wrench for Garbage Disposal?
Almost all garbage disposals have a 1/4 inch hex hole at the bottom. So, if you have such a unit, ¼ inch would be the best serving jam buster wrench size.
A Special Allen Wrench for You
InSinkErator has manufactured a fantastic, efficient, and easy-to-use Allen wrench. The six-sided head of the key will fit your disposer’s hole properly, allowing you to move it with great convenience.
For the purpose of freeing up your disposer unit with a pleasant experience, consider getting this wrench for doing it more easily.
How to Understand Whether the Disposal is Jammed or Not?
Observe the disposal unit when running. If you hear a humming sound, there is something wrong for sure. Meaning the unit is jammed. The sound is produced when the motor strains against the accumulated substances.
If you still keep running the jam disposal, the motor will heat up, resulting in a sudden shut down of the motor.
What Jams Your Disposal Unit?
A variety of things like pits from fruit, fat, silverware, and so many things can block the disposal. Sometimes the cause may be other than food materials.
There is one thing you should be careful about. If the disposal gets blocked suddenly soon after clearance, the blockage is probably due to other than food particles.
In this case, the traditional method wouldn’t work. So, you better call a plumber to fix the issue for you.
Related Read: Best Allen Wrench Set
How to Fix a Garbage Disposal with an Allen Wrench
The simple basic principle of un-jamming a unit is to remove the objects creating trouble. You can do it very easily by using a wrench for garbage disposal. Just follow the simple step by step procedures described below:
Things You Will Need –
- Flashlight
- Allen wrench
- Needle-nose plier
Step 1
At the very beginning, you must turn off the power supply. To avoid someone accidentally turning on the disposer, unplug the unit or turn off the disposal’s circuit breaker.
Step 2
Find the keyhole at the bottom of the disposal. Set the head of the shorter arm of the Allen wrench on the socket of the unit. If you don’t have a workable hex key, you can buy this one.
Step 3
Move the Allen wrench back and forth in both directions to loosen the jam particles. The wrench may not move easily at first. You can use a bit of force to initiate the process.
Step 4
Keep the hex key moving counter-clock and clockwise until it moves freely in full circle in any direction. Whatever material caused the blockage, this Allen wrench will surely loosen the accumulation.
Step 5
Find the overload protector on the bottom of the unit. It’s a small red button.
The button may drop down around 5 mm. If this happens, restore it by pressing gently.
Still not staying up? Wait a few minutes and try again.
Step 6
Look through the sink opening into the garbage disposal unit. Use a flashlight to have a clear look.
Step 7
If you can see anything inside the disposal unit, remove it. Don’t use your hands; use pliers or tongs instead.
Step 8
Restore the power supply.
Step 9
Press the reset button. Resetting may take several minutes.
Step 10
Now turn on the water, and run the disposal unit. If it still doesn’t work smoothly, use the Allen wrench again.
Need a new Garbage Disposal? Our recommended best garbage disposal brand is InSinkErator.
Conclusion
I think you won’t be worried anymore about how to fix a garbage disposal with an Allen wrench after this discussion. Lastly, don’t forget to find the right size of wrench for disposal. The InSinkErator Allen wrench that I have mentioned above will fit any disposer.
Leave a Reply