How to Use a Basin Wrench – The Right Way You Need To Know

Learning how to use a basin wrench makes our life so much easier! No lie. Before, you'd have to hire plumbers, and they are very efficient at what they do, but they're still expensive considering that we can do most of those things by ourselves.

How to Use a Basin Wrench

See More Photos On Amazon.com

With the rise of the how-to guides and the desire of people to practice their DIY skills, there are a lot of house activities that we can do with nothing more than our tools, and a useful guide online.

We're counting on you to have the tools because we'll be providing the information. Today, we'll learn about the basin wrench, which is a tool that every plumber or handyman must have at their disposal.

This tool is responsible for keeping our structures together, and that’s no exaggeration because it works to loosen or tighten nuts. Nuts which, as you know, are the decisive element that defines whether a construction remains in place, or shatters to the ground.

Now that we understand a little better what the basin wrench is, and what it does, we'll go through the process of using it. Just like any other tool, the best way to understand how it works is by practicing ourselves and using it. So, if you've got your wrench ready, it is time for us to begin.

Positioning the Wrench's Head

The first thing you must do is to pivot the basin wrench head. You want to have it perpendicular to the shaft direction, and place it in a way that faces towards the preferred direction, whether you want to lose or tighten the nut.

Positioning the Wrenches Head

If you want to use the wrench to loosen the nut, follow the next instructions.

After setting it up and getting a firm grasp on the basin wrench, start turning it counterclockwise. During this operation, make sure the claw's opening at the head and remains on the right.

Instead, if you want to tighten the nut, here's what you need to do.

Grab the wrench, and start turning it clockwise. In this case, the claw opening must be on the left side.

Clockwise for tightening, and counterclockwise to loosen; that's a pretty basic principle that everyone learns quickly, and it will help you out for the rest of your life. It is not exclusive to plumbing activities either.

One method to know if you're doing it right is to keep track of the claw's grip. If it slips off right as you start turning it, then you'll know it wasn't properly setup. Then, you have to begin the process all over again.

Using the Wrench

After locating the mounting nut of the faucet, put the basin wrench's head surrounding it. This process allows the claw's jaws to get a full grip around the nut.

With the help of the T-bar located at the end, turn the shaft. This process will either loosen or tighten it, depending on the direction where you're turning.

If it requires additional strength, don't hesitate using both of your hands.

You can use your hands in two operations here. Use one to slide the bar across the other side using one of your hands, while keeping the wrench shaft stabilized using your remaining free hand.

Trust me when I tell you it is easier than it seems. Using a basin wrench is one of those activities that is better to learn through practice than to theory, but it never hurts to know its basics.

Using the Basin Wrench with Older Faucets

The real issues may come up when you're working with older faucets, though. If it suffers from corrosion, moving the nut out of place turns out to be even more complicated, but there are some tricks that you can use to make it easier.

how to use a basin wrench

What you want to do with rusted nuts is to spray some penetrating oil over it. Then, wait a couple of minutes, and attempt to loosen it once again using the basin wrench.
It might be complicated, and it takes some time, but it is not impossible.

Tips for Using a Basin Wrench

As you can see, using a basin wrench is not that complicated. Even when the nut is suffering from corrosion and tighten up extremely, there are methods to work your way around it.

Also, we have a couple of tips to share with you, in case using the basin wrench turns out to be more complicated than it should.

Consider a Telescopic Basin Wrench

Working under the sink could be frustrating sometimes, especially if there are certain places where you can't reach, regardless of how long your arms are, and how much you keep trying.

How to Use a Basin Wrench

The telescopic basin wrench comes in to save the day in those circumstances. It includes an expandable shaft, which you can use to reach those tight spots of the faucets.

The telescopic basin wrench comes in to save the day in those circumstances. It includes an expandable shaft, which you can use to reach those tight spots of the faucets.

Using a Pipe

Why using a pipe? Well, a pipe could give you more stability while trying to remove stubborn nuts that won't come off easily.

Combine it with an adjustable wrench to improve your chances of success. You can even put it at the back end of the wrench to gain more traction and loosen the nut without too much effort.

The Claw's Versatility

The claw of the wrench works for almost everything, and it will grab the nut regardless of its position or angle. While working on tight spaces, make sure to move the basin wrench head to put it in a comfortable position for you.

Final Words

That was our how to use a basin wrench guide. Nonetheless, as mentioned above, we encourage you to practice and get a better understanding of what you can do with it, and how to make it work while still being comfortable for you and your hands.

Once you get used to it, you'll discover that these DIY activities are highly rewarding. No more will you have to depend on others to solve those frustrating regular household issues.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: