The best low current dc clamp meter is a tool that can clamps down to 0.25A or less current. This means that it can measure either volts or amps which is perfect for low current systems. The meter also has a long life span which is ideal for longterm use.
Top 10 Best Low Current Dc Clamp Meters – Top Picks
![[Holiday Sales Until 12/30] TECPEL CA-60 AC/DC Current clamp Transmitter Probe 60A CA-60](https://m.media-amazon.com/images/I/41tg3zEGU7L._SL500_.jpg)
General Technologies Corp GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter
The General Technologies Corp GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter is an effective tool for measuring and monitoring AC/DC devices. The meter has a low current that is perfect for using with machines that have low power requirements. The meter can be used with or without booster, and has a standard reading range of 1 amps to 100 amps.
Feature
- AC/DC current measurement from 0.001 up to 100 A. which makes it a great tool for measuring parasitic draws and AC/DC voltage measurement up to 600 volt
- Small jaw: 1.2 inches (W) x 0.53 inches (D) (300×13.4millimeters) with clamp opening up to 1/2 inch (12.5 millimeters)
- Peak and Data hold functions with one rotary switch operation
- 2 readings per second sampling and continuity check with audible indicator
- Test leads soft carrying deluxe pouch and batteries included
ES Electronic Specialties 688 True RMS Low Current Clamp Meter
The True RMS low current clampmeter is perfect for use with industrial and commercial circuits. It has a high-quality construction that is easy to read, and it clamps correctly to the side of your meter. The clampmeter can handle high current levels, and it has a long life time because of its RMS low current clamped design.
Feature
- Accurate measurements down to 1 mA (.001A) – 80A maximum reading DC/AC
- Larger clamp size of .75″ (19 millimeter) and improved zero drift stability – Electronic Specialties enlarged the clamp opening as much as possible while still maintaining 1 mA resolution
- Minimum/Maximum and Peak Minimum/Maximum functions, Data Hold, Relative Zero – Full DMM built-in
- Built-in Temperature F & C – Temp probe included
- Measures DC/AC Amps, DC/AC Volts, Resistance, Capacitance, Frequency (Hz) and Temperature
KAIWEETS HT206D Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-rang…
The KAIWEETS HT206D digital clampmeter is a powerful and easy-to-use tool that is perfect for testing digital devices and components. The meter can measure current and voltage levels, and can withstand high current and voltage levels by using a self-accelerating rate control. The meter also features auto-ranging capabilities, so you can track specific values over time, and can determine the quality of a digital device or component by measuring its current and voltage levels.
Feature
- True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
- LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
- NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
- Multi-function: Two-color backlit LCD Display – When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
- Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.
Bside ACM91 1mA Clamp Meter DC/AC Current True RMS Auto-Ranging 6000 Counts Multimeter Liv…
The Bside ACM91 1mA Clamp Meter is a great tool for measuring current and temperature inrued from electrical applications. It has a live check function and auto-ranging capabilities, making it a great tool for electrical safety and accuracy. The clamps are also easy to use, coming with a back clip for easy storage.
Feature
- [1mA Sensitivity]: 1mA sensitivity when measures AC/DC current by clamp.
- [Dual Line Display]: Dual line display can show both AC voltage/current and frequency or Celsius and Fahrenheit on the screen.
- [Low Impedance Mode]: Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.
- [Activate V-Alert at Any Function]: Activate V-Alert (non-contact voltage detection) function under any function design makes non-contact voltage testing more convenient.
- [Back Clip Design]: Back clip design make it more portable, hang on your belt or pocket.
Klein Tools CL800 Digital Clamp Meter, Autoranging TRMS, AC/DC Volt/Current, LoZ, Continui…
The Klein Tools CL800 Digital Clamp Meter is an autoranging clamps that comes with a 1000V Volt/Current, LoZ, Continuity, Frequency, Capacitance, NCVT, andTemp meter. It has a single reading code, 1000V, and can measure current and voltages up to 1000V. It is an excellent choice for measuring metal and plastic components, and is also a great choice for automatic clamps.
Feature
- Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
- Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
- Thermocouple probe measures temperature
- Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
- CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
- Built to withstand a 6.6-Foot (2m) drop
- Low battery indicator and easily accessible battery compartment
Hantek CC-65 AC/DC Multimeter Current Clamp Meter with BNC Connector Up to 20 kHz 20mA to …
Hantek CC-65 AC/DC Multimeter Current Clamp Meter with BNC Connector Up to 20 kHz 20mA to 65A DC is a great tool for current clamping applications. The unit has a 20mA to 65A DC input and can clamp current up to 20mA or 20A. The unit also has a BNC connector for connection to electric meters or other current clamping devices.
Feature
- Power circuit measurement and malfunction analysis
- Motor drive of frequency converter (or other electronics) measurement
- Power electronics equipment measurement
- Allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms
- Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage
Fluke 353 True RMS Clamp-Meter, 2,000A AC/DC, Conductors to 58mm, Frequency Measurement
The Fluke 353 True RMS Clamp-Meter is a great tool for measuring AC/DC conductors and frequencies. The clamp-meter has a high-quality, traditional design, making it suitable for general use. The clamps are universal, making it suitable for use with most clamps. The Fluke 353 True RMS Clamp-Meter is also multiple-useable, meaning it can be used as a clamps meter and clamps computer.
Feature
- Digital clamp-meter measures AC and DC to 2,000A and frequency to 1kHz
- True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
- Clamp with 58mm (2.3 inches) jaw opening fits around large or multiple conductors to measure current without touching or interrupting the circuit
- Inrush current function analyzes the surge current at the startup of motors and other inductive loads to provide accurate, stable measurements
- Meets IEC safety standard 61010-2-032, and is rated for CAT IV installations to 600V and CAT III installations to 1,000V
Amprobe LH41A Low Current Clamp On Ammeter
The Amprobe LH41A is a low current clamped on ammeter that is designed to improve accuracy and consistency in current calculation. It is a infringment of the National Football League (NFL) rule book rule 3:106. It allows users to set current’s below the threshold of 0.5 amps for periods of up to 30 minutes, with a allowed current range of 0.2 to 2 amps. The LH41A also allows for users to monitor their current’s across the entire range, without having to remember to adjust the clamped on ammeter.
Feature
- Digital clamp meter measures alternating current (AC) or direct current (DC) to 40 amp
- Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform
- Hall effect clamp with 0.78″ (28 mm) jaw opening measures current without touching or interrupting the circuit
- Zero adjust function compensates for changes in output voltage due to environmental conditions
- Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 300V
[Holiday Sales Until 12/30] TECPEL CA-60 AC/DC Current clamp Transmitter Probe 60A CA-60
The TECPEL CA-60 AC/DC Current clamp Transmitter Probe is perfect for testing current clamps on electronic devices. This probe is made from durable plastic and has a coolant flow rate indicator for accurate testing. The CA-60AC is an excellent choice for current clamps testing in businesses and plants.
Feature
- TECPEL CA-60 AC / DC mA Current Clamp transmitter probe
Fluke 80i-110s AC/DC Current Clamp
The Fluke 80i-110s AC/DC current clamp is a great way to keep your electronics current running at a consistent level. This clamp is made from durable plastic and is height-adjustable to fit most devices. The clamps have a heavy-duty metal clip for attaching to a wall and have a five-year warranty.
Feature
- Compatible with any Fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter
- Compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter
- Designed to provide you with safe, high accuracy measurements for a wide range of applications
- Specially designed built-in safety features such as the 600 V RMS rating at the input jaws, output cable and BNC connector enhance work safety in industrial and commercial power distribution systems
- The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems
How To Choose A Low Current Dc Clamp Meter
Price
It’s important to understand how much money you’re willing to spend on the best low current dc clamp meter because you don’t want to buy a low current dc clamp meter you can’t afford.
To figure out what you’re looking to spend, you’ll need to think about your budget, the amount of time spent on your new low current dc clamp meter, and the type of low current dc clamp meter you’re thinking about buying.
Another thing to consider is the durability of the low current dc clamp meter. The more durable the low current dc clamp meter, the higher the cost. It may be cheaper to buy a low current dc clamp meter that doesn’t have a warranty, but it may end up costing you more in the long run if the low current dc clamp meter gets damaged.
Brand Value
When it comes to buying the best low current dc clamp meter, you’ll want to consider the brand as well as the price. Therefore, you should know what you’re looking for in a low current dc clamp meter brand and what features you want to see in a low current dc clamp meter before you start shopping. Two main factors will help you determine a brand’s value: quality and reputation.
Quality
It’s important to find a brand with a great track record for offering high-quality low current dc clamp meters. You want to be sure they’ve been around for a while, that they’ve had time to refine their low current dc clamp meter designs. And that they have a history of offering a good service.
Reputation
Some brands just seem to pop up out of nowhere and become popular overnight. They’ll offer a great deal and then disappear into obscurity. You don’t want to buy a low current dc clamp meter from a company that you haven’t heard of or researched first.
Durability
When it comes to the best low current dc clamp meters, durability is a huge factor. The good news is that there’s no shortage of models to choose from. Some models are made of quality materials, while others are cheap and can break down over time. Therefore, it’s important to know exactly what you’re buying before you buy it.
When looking at low current dc clamp meter models, check the warranty information to ensure that the manufacturer stands behind the product.
Specifications
There’s a reason why the term “spec” is used so frequently when you’re shopping for a low current dc clamp meter. It means specifications, and there are plenty of these to consider when you’re looking for the best low current dc clamp meter to buy.
It’s essential to know what features to look for, as well as the quality and longevity of a low current dc clamp meter before you buy one.
Customer Ratings 6
It’s important to know if your low current dc clamp meter is durable and has been around the block. That’s why it’s crucial to look at the customer ratings, as they can help you find out how long the low current dc clamp meter has been on the market, as well as its durability and comfort level.
Customer reviews will let you know how long the product has been on the market and whether it was an easy buy. They will also give you an idea of how durable and good the low current dc clamp meter is.
You can even get a sense of the overall quality of the low current dc clamp meter if you read the customer reviews for similar models.
Design
As a consumer, there are some things you need to think about when it comes to buying a low current dc clamp meter. First, consider how much you want to spend on your low current dc clamp meter.
If you’re going to be regularly buying, then it’s okay to spend a bit more. On the other hand, if you’re planning to keep one for decades, it may be wise to invest in something that will last longer.
This isn’t easy when buying a low current dc clamp meter online. So it’s important to know exactly what you’re looking for in a low current dc clamp meter before you choose one of these models.
Frequently Asked Questions Related to low current dc clamp meter
1. What are the benefits of using a low current dc clamped meter?
The benefits of using a low current dc clamped meter include: 1. It can help to reduce the risk of lost data or damage to the meter itself due to sudden changes in power.2. It can help to improve accuracy and consistency when measuring power.3. It can help to improve accuracy and performance when measuring power over a long period of time.
2. How do you properly care for a low current dc clamped meter?
One way to care for a low current dc clamped meter is to properly care for the meter by filling it with a properly made and stored bias wire, and to avoid being wet. Another way to care for a low current dc clampedmeter is to not fill the meter with bias wire, and to use a dry meter.
3. How do you effectively measure power in a low current dc clamped meter?
You can use a current limiting resistor to increase the current through the meter while reducing the power. You can also use a current limiting resistor to increase the power through the meter while reducing the current.
End Note
If you’re looking to clamp current devices without using too many tools, the low current dc clamp meter can be a helpful tool. This meter has aHerta-2 algorithm that helps you measure current devices without using too much time and effort.
Leave a Reply